Catalog Contents: Drawer Front Screws

Catalog Contents > Anchors > Insert and Power Bits > Hardware Screws > Square Drive Trim Head Screws > Specialty Insert and Power Bits > Magnetic Holders and Nutsetters > Combo Drive Round Washer Screws > Drawer Front Screws

29 Results (Showing 1–15) Page 1 of 2
1» 2»

Drawer Front Screws – Standard Round Washer .500 OD Square #2 Drive Zinc
Part #	Description	Unit	Cs Qty	Pk Qty	Unit lbs	Ref#
12624	# 8 X 7/8 Square/Phillips Round Washer .500 OD Q$-T17 Zinc Clear	CS	8,000	-	39.60	1
10459	# 8 X 7/8 Square/Phillips Round Washer .500 OD Q$ Zinc Clear	PK	24	100	0.49	2
12931	# 8 X 7/8 Square/Phillips Round Washer .500 OD Q$-T17 Zinc Clear	PK	24	100	0.49	2
12668	# 8 X 7/8 Square/Phillips Round Washer .500 OD Q$-T17 Zinc Clear	PK	4	1,000	5.05	1
10458	# 8 X 7/8 Square/Phillips Round Washer .500 OD Q$ Zinc Clear	PK	6	1,000	4.90	2
9989	# 8 X 1 Square/Phillips Round Washer .500 OD Q$ Zinc Clear	CS	7000	-	35.70	2
12625	# 8 X 1 Square/Phillips Round Washer .500 OD Q$-T17 Zinc Clear	CS	7000	-	35.70	1
10466	# 8 X 1 Square/Phillips Round Washer .500 OD Q$ Zinc Clear	PK	24	100	0.55	2
12932	# 8 X 1 Square/Phillips Round Washer .500 OD Q$-T17 Zinc Clear	PK	24	100	0.50	1
12669	# 8 X 1 Square/Phillips Round Washer .500 OD Q$-T17 Zinc Clear	PK	4	1,000	5.41	1
10465	# 8 X 1 Square/Phillips Round Washer .500 OD Q$ Zinc Clear	PK	6	1,000	5.50	2
10252	# 8 X 1 1/8 Square/Phillips Round Washer .500 OD Q$ Zinc Clear	CS	6000	-	32.70	2
12626	# 8 X 1 1/8 Square/Phillips Round Washer .500 OD Q$-T17 Zinc Clear	CS	7000	-	38.15	1
10468	# 8 X 1 1/8 Square/Phillips Round Washer .500 OD Q$ Zinc Clear	PK	24	100	0.65	2
12933	# 8 X 1 1/8 Square/Phillips Round Washer .500 OD Q$-T17 Zinc Clear	PK	24	100	0.55	1

» Go Back «
Ref #1

Image for all parts using Ref# 1

» Go Back «
Ref #2

Image for all parts using Ref# 2

Drawer Front Screws Drawer Front

1/2" Outside Diameter, Large Round Washer Head provides for better adjustment control.
Washer Head Adjusting Screw

Drwer Front
When building a typical 5 piece drawer box, it is desirable to have the ability to move and precisely adjust the drawer front in order to align all of the drawer faces.

An oversize hole (5/16" - 3/8") is drilled through the drawer box
The drawer front is then attached using two Drawer Front Adjusting Screws.
During installation, the Drawer Front Adjusting Screws can be loosened slightly to allow for drawer front adjustment and alignment. The screws are then re-tightened
A hardware screw or "set-screw" can be used to secure the drawer front into place.

*All lengths and gauges may not be available with
each head style, thread style, special feature or finish.
Please see individual parts in catalog for specifics.